Summary :

media disconnected

If you lot run the ipconfig /all command in Windows ten Command Prompt to check your Internet connection, you lot may observe the window pops upward the error message – media state media disconnected. How to ready the Windows x media disconnected fault? Become some unproblematic solutions from the post of MiniTool now!

Media Disconnected Windows 10

Today, personal computers without an Internet connection are most useless. According to some users, they couldn't connect to both the Ethernet and wireless network on their Windows 10 PCs. Possibly you are one of these users.

In this case, you may choose to make a check for the WIFI adapter or the Ethernet adapter. For example, run the ipconfig /all command in Command Prompt (CMD) to listing all the connected media including Ethernet and WIFI forth with its status.

All the same, you receive the mistake - media country media disconnected. The error may exist followed past real connection problems. From the CMD error messages, the error refers to the trouble with the network adapter or the network configurations.

Next, let's go to troubleshoot the issue - wireless LAN adapter media disconnected or Ethernet adapter media disconnected.

Ipconfig Media Disconnected Fix Windows 10

Method 1: Reset WINSOCK and IP Stack

You can reset the network configurations in Windows 10 by resetting WINSOCK and IP Stack. Nigh of the local surface area connection media disconnected can be fixed subsequently this way.

1. In the commencement search box, input cmd and right-click Command Prompt to choose Run equally administrator.

2. Run these commands one by one and press Enter subsequently each one:

netsh winsock reset catalog

netsh int ipv4 reset reset.log

netsh int ipv6 reset reset.log

reset INSOCK and IP Stack
winsock reset command windows 10 thumbnail

This guide shows how to use Netsh Winsock reset command to repair Windows 10 network problems. Reset network adapter, Winsock catalog to ready network problems.

three. After finishing resetting Windows Sockets API entries and IP stack, restart your computer to allow changes take event. Then, check if the ipconfig media asunder error is solved.

Method two: Check If the Network Adapter Is Enabled

If y'all take disabled the network adapter in Windows 10, so the wireless LAN adapter or Ethernet adapter media disconnected error happens. So, you lot need to re-enable it well.

  1. Go to Settings > Network and Internet > Ethernet > Change adapter options to open the Network Connections interface. Alternatively, you lot tin input ncpa.cpl to the Run dialog (got by pressing Win + R keys) and click OK to open the interface.
  2. Right-click on your network adapter and choose Enable.
enable network adapter

Method 3: Disable Network Sharing

Disabling network sharing for the adapter should be washed to fix the wireless LAN adapter media disconnected event in Windows ten. This has been proved to be helpful by some users, so it is worth a endeavor.

  1. Go to the Network Connections interface by post-obit footstep ane mentioned in method 2.
  2. Correct-click on your Wi-Fi and click Properties.
  3. Under the Sharing tab, uncheck the check-box next to the selection - Permit other network users to connect through this calculator's Net connection.
  4. Click OK finally.

Method 4: Run the Network Troubleshooter

In your Windows 10 computer, the congenital-in troubleshooter, a Windows tool can be used to browse and fix some problems. So if the media disconnected error happens, you can try to run the network troubleshooter.

  1. Caput to Start > Settigns > Update & Security.
  2. Under the Troubleshooter window, expand Network Adapter and run the troubleshooter to fix bug with wireless and other network adapters.
run network adapter troubleshooter

Method v: Update Network Adapter Drivers

If the network adapter commuter is outdated, you lot may go the media asunder error. To connect to the network, you should update the commuter to the latest version.

Tip: Commuter update may crave an Internet connection. So, you should download the driver the OEM website on another reckoner, put it to your PC and then offset the update.

  1. Open Device Managing director by following 1 of the ways in this post - ten Ways to Open Device Manager Windows ten.
  2. Expand Network adapters and right-click one driver to choose Update driver.
  3. Choose Browser my reckoner for driver software and so follow the on-screen instructions to finish the driver update.
browser my computer for driver software

Final Words

Now we come up to the end of this mail. If you are experiencing the media disconnected error bulletin in Windows 10 after running the ipconfig /all command, just endeavor these v uncomplicated methods to fix the ipconfig network issue. They are proved to exist useful to solve your issue.